psql [ dbname ] psql -A [ -c query ] [ -d dbname ] -e -E [ -f filename ] [ -F separator ] [ -h hostname ] -Hln [ -o filename ] [ -p port ] -qsSt [ -T table_o ] -ux [ dbname ]
psql accepts many command-line arguments, a rich set of meta-commands, and the full SQL language supported by Postgres. The most common command-line arguments are:
The name of an existing database to access. dbname defaults to the value of the USER environment variable or, if that's not set, to the Unix account name of the current user.
A single query to run. psql will exit on completion.
The full set of command-line arguments and meta-commands are described in a subsequent section.
There are some environment variables which can be used in liu of command line arguments. Additionally, the Postgres frontend library used by the psql application looks for other optional environment variables to configure, for example, the style of date/time representation and the local time zone. Refer to the chapter on libpq in the Programmer's Guide for more details.
You may set any of the following environment variables to avoid specifying command-line options:
The DNS host name of the database server. Setting PGHOST to a non-zero-length string causes TCP/IP communication to be used, rather than the default local Unix domain sockets.
The port number on which a Postgres server is listening. Defaults to 5432.
The target for display of messages from the client support library. Not required.
If PGOPTION is specified, then the options it contains are parsed before any command-line options.
PGREALM only applies if Kerberos authentication is in use. If this environment variable is set, Postgres will attempt authentication with servers for this realm and will use separate ticket files to avoid conflicts with local ticket files. See the PostgreSQL Administrator's Guide for additional information on Kerberos.
psql is a character-based front-end to Postgres. It enables you to type in queries interactively, issue them to Postgres, and see the query results.
psql is a Postgres client application. Hence, a postmaster process must be running on the database server host before psql is executed. In addition, the correct parameters to identify the database server, such as the postmaster host name, may need to be specified as described below.
When psql starts, it reads SQL commands from /etc/psqlrc and then from $(HOME)/.psqlrc This allows SQL commands like SET which can be used to set the date style to be run at the start of every session.
psql attempts to make a connection to the database at the hostname and port number specified on the command line. If the connection could not be made for any reason (e.g. insufficient privileges, postmaster is not running on the server, etc) .IR psql will return an error that says
Connection to database failed.The reason for the connection failure is not provided.
In normal operation, psql provides a prompt with the name of the database that psql is current connected to followed by the string "=>". For example,
$ psql testdb Welcome to the POSTGRESQL interactive sql monitor: Please read the file COPYRIGHT for copyright terms of POSTGRESQL [PostgreSQL 6.5.0 on i686-pc-linux-gnu, compiled by gcc 220.127.116.11] type \? for help on slash commands type \q to quit type \g or terminate with semicolon to execute query You are currently connected to the database: testdb testdb=>
At the prompt, the user may type in SQL queries. Unless the -S option is set, input lines are sent to the backend when a query-terminating semicolon is reached.
Whenever a query is executed, psql also polls for asynchronous notification events generated by LISTEN and NOTIFY.
psql can be used in a pipe sequence, and automatically detects when it is not listening or talking to a real tty.
Author: From Brett McCormick on the mailing list 1998-04-04.
To affect the paging behavior of your psql output, set or unset your PAGER environment variable. I always have to set mine before it will pause. And of course you have to do this before starting the program.
In csh/tcsh or other C shells:
% unsetenv PAGERwhile in sh/bash or other Bourne shells:
% unset PAGER
psql understands the following command-line options:
Turn off fill justification when printing out table elements.
Specifies that psql is to execute one query string, query, and then exit. This is useful for shell scripts, typically in conjunction with the -q option in shell scripts.
Specifies the name of the database to connect to. This is equivalent to specifying dbname as the last field in the command line.
Echo the query sent to the backend
Echo the actual query generated by \d and other backslash commands
Use the file filename as the source of queries instead of reading queries interactively. This file must be specified for and visible to the client frontend.
Use separator as the field separator. The default is an ASCII vertical bar ("|").
Specifies the host name of the machine on which the postmaster is running. Without this option, communication is performed using local Unix domain sockets.
Turns on HTML 3.0 tabular output.
Lists all available databases, then exit. Other non-connection options are ignored.
Do not use the readline library for input line editing and command history.
Put all output into file filename. The path must be writable by the client.
Specifies the TCP/IP port or, by omission, the local Unix domain socket file extension on which the postmaster is listening for connections. Defaults to the value of the PGPORT environment variable, if set, or to 5432.
Specifies that psql should do its work quietly. By default, it prints welcome and exit messages and prompts for each query, and prints out the number of rows returned from a query. If this option is used, none of this happens. This is useful with the -c option.
Run in single-step mode where the user is prompted for each query before it is sent to the backend.
Runs in single-line mode where each query is terminated by a newline, instead of a semicolon.
Turn off printing of column names. This is useful with the -c option in shell scripts.
Allows you to specify options to be placed within the table ... tag for HTML 3.0 tabular output.For example, border will give you tables with borders. This must be used in conjunction with the -H option.
Asks the user for the user name and password before connecting to the database. If the database does not require password authentication then these are ignored. If the option is not used (and the PGPASSWORD environment variable is not set) and the database requires password authentication, then the connection will fail. The user name is ignored anyway.
Turns on extended row format mode. When enabled each row will have its column names printed on the left with the column values printed on the right. This is useful for rows which are otherwise too long to fit into one screen line. HTML row output supports this mode also.
You may set environment variables to avoid typing some of the above options. See the section on environment variables below.
Anything you enter in psql that begins with an unquoted backslash is a psql meta-command. Anything else is SQL and simply goes into the current query buffer (and once you have at least one complete query, it gets automatically submitted to the backend). psql meta-commands are also called slash commands.
The format of a psql command is the backslash, followed immediately by a command verb, then any arguments. The arguments are separated from the command verb and each other by any number of white space characters.
With single character command verbs, you don't actually need to separate the command verb from the argument with white space, for historical reasons. You should anyway.
The following meta-commands are defined:
Toggle field alignment when printing out table elements.
Set the HTML3.0 table caption to "caption".
Establish a connection to a new database, using the default username if none is specified. The previous connection is closed.
Perform a frontend (client) copy. This is an operation that runs a SQL COPY command, but instead of the backend reading or writing the specified file, and consequently requiring backend access and special user privilege, psql reads or writes the file and routes the data to or from the backend. The default tab delimiter is used.
Tip: This operation is not as efficient as the SQL COPY command because all data must pass through the client/server IP or socket connection. For large amounts of data this other technique may be preferable.
List tables in the database, or if table is specified, list the columns in that table. If table name is specified as an asterisk ("*"), list all tables and column information for each tables.
List all available aggregates.
List the description from pg_description of the specified object, which can be a table, table.column, type, operator, or aggregate.
Tip: Not all objects have a description in pg_description. This meta-command can be useful to get a quick description of a native Postgres feature.
List only indexes.
List only operators.
List only sequences.
List system tables and indexes.
List only non-system tables.
Edit the current query buffer or the contents of the file filename.
Edit the current query buffer or the contents of the file filename and execute it upon editor exit.
Set the field separator. Default is a single blank space.
Send the current query input buffer to the backend and optionally save the output in filename or pipe the output into a separate Unix shell to execute command.
Give syntax help on the specified SQL command. If command is not a defined SQL command (or is not documented in psql), or if command is not specified, then psql will list all the commands for which syntax help is available. If command is an asterisk ("*"), then give syntax help on all SQL commands.
Toggle HTML3 output. This is equivalent to the -H command-line option.
Read queries from the file filename into the query input buffer.
List all the databases in the server.
Toggle the old monitor-like table display, which includes border characters surrounding the table. This is standard SQL output. By default, psql includes only field separators between columns.
Save future query results to the file filename or pipe future results into a separate Unix shell to execute command. If no arguments are specified, send query results to stdout.
Print the current query buffer.
Quit the psql program.
Reset(clear) the query buffer.
Print or save the command line history to filename. If filename is omitted, do not save subsequent commands to a history file. This option is only available if psql is configured to use readline.
Toggle display of output column name headings and row count footer (defaults to on).
Allows you to specify options to be placed within the table ... tag for HTML 3.0 tabular output.For example, border will give you tables with borders. This must be used in conjunction with the \H meta-command.
Toggles extended row format mode. When enabled each row will have its column names printed on the left with the column values printed on the right. This is useful for rows which are otherwise too long to fit into one screen line. HTML row output mode supports this flag too.
Outputs the current query buffer to the file filename.
Produces a list of all tables in the database with their appropriate ACLs (grant/revoke permissions) listed.
Escape to a separate Unix shell or execute the Unix command command.
Get help information about the slash ("\") commands.